10 Most Common Embroidery Digitization Mistakes That Needs to be Avoided

Are you new to Embroidery digitizing or looking to identify what went wrong in your work? A beginner at Embroidery digitizing work must keep your time, cost, and mentally strong by preventing the below-mentioned errors that commonly occur to become the best digitizing service for embroidery. Initially, it is common to create mistakes in Embroidery digitizing since you might be tensed about the outcome of your work and customer satisfaction.

This happens because, for an introductory program with Simple art, hundreds of selections and plotting must be appropriately given as input. One small change in a place can drastically impact the outcome. Being in business for more than 10 years and the best embroidery digitizing company in the country, we have experienced, experimented with, and now guide you to avoid such mistakes at the initial stage.

Planning Issue:

Very detailed planning is required before starting digitizing embroidery work. Collect all the needed resources from the Client so that any future re-works can be avoided. Without any clear plan, your design would look dull, and it would be a poor design to show it to the Client.

Mismatched Styles:

Always think twice before choosing an underlay whether it would be the right choice for the fabric and the design made. Underlay plays the leading role for Embroidery digitizing because poor choice might lead to a complete disaster of the design and even the fabric on which it is made.

Poor Push and Pull:

The following common and embarrassing moment in Embroidery digitizing is designing without considering Poor push and pull compensation. To make the design perfect on the substrate or its shape or its placement on the product, push and pull compensation must be controlled to show the difference between a curved frame from the flat one.

Stitch Direction:

A design that has the same color thread all over will not attract people. However, the same can attract everyone when the stitch direction is varied and gives a beautiful look. It is always essential to know the product on which the design will be made and the right direction of the push of thread for an excellent finish.

Underlay:

The main reason for less compensation causes underlay setting issues and other poor-fitting problems. Underlay is vital to fix the embroidery design on the fabric in place. However, using the wrong dimensions can push your product to low quality.

Density:

If there is no clear idea about density, it can create numerous problems in your work, especially if your design is too thin or too thick. The right density level is a bonus for your design.

Fill Stitch:

Fill stitches are filled inside the outline of the design, where a good knowledge of types of loading and their effect is much needed. A good understanding is necessary to bring variations in visuals to your design.

Stitch Length and Width:

To be the best Embroidery digitizing service, professional finishing of your design, a proper stitch length is essential; otherwise, the underlay might cause problems with lettering, especially with small lettering. Using the right stitch length brings much improvement in the final quality of the design. Similarly, usage of incorrect stitch width leads to looping of stitches and many trims that make the product look poorly made.

Wrong Product:

A custom embroidery digitizing company make custom design for their clients. But creating a proper design considering the product is essential. For example, a design made for a jacket does not suit a cap because of the curved surface of the hat.

Quality Check:

A successful Embroidery digitizer constantly evaluates his work. So, it is always better to analyze the quality before sending the product to the customer, get a better reputation, and improve your work further.

I Hope, by avoiding these simple mistakes, you can improve yourself.

Leave a Reply

Your email address will not be published. Required fields are marked *